![](/images/new-backgrounds/1291428/291428131x1.webp)
Grey Headline (continued)
Interworking
TANDBERG VIDEO COMMUNICATIONS SERVER ADMINISTRATOR GUIDE
Overview
About Interworking
The VCS is able to act as a gateway between SIP and H.323, translating calls from one protocol to the other. This is known as “interworking”.
By default, the VCS will act as a
You can change this setting so that he VCS will act as
You also have the option to disable interworking completely.
!setting as RegisteredOnly (where calls are interworked only if at leastWe recommend that you leave this
one of the endpoints is locally registered). Unless your network is correctly configured, setting it to On (where all calls can be interworked) may result in unnecessary interworking, for example where a call between two H.323 endpoints is made over SIP, or vice versa.
The VCS cannot act as an IPv4 to IPv6 gateway at the same time as it is acting as a SIP to H.323 gateway.
Calls for which the VCS is acting as an
SIP to H.323 gateway are traversal calls. They will therefore require a
traversal call licence.
Configuring Interworking
Interworking options are configured via:
•VCS Configuration > Protocols > Interworking. You will be taken to the Interworking page.
•xConfiguration Interworking Mode
Save |
| H.323 |
Click here to save your changes. |
| Determines whether or not the VCS will act as a gateway between SIP and H.323 calls. |
|
| Off: the VCS will not act as a |
|
| RegisteredOnly: the VCS will act as a |
|
| locally registered. |
|
| On: the VCS will act as |
|
| registered. |
|
|
|
Introduction | Getting Started |
| Overview and |
| System | VCS | Zones and |
| Call |
| Bandwidth |
| Firewall |
| Maintenance |
| Appendices |
| Status |
| Configuration | Configuration | Neighbors |
| Processing |
| Control |
| Traversal |
|
| ||||
|
|
|
|
|
|
|
|
|
|
| |||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
D14049.03 |
|
|
|
|
|
| 66 |
|
|
|
|
|
|
|
| ||
MAY 2008 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|