Lantronix 900-560 manual Terminal Settings, Line Terminal Configuration

6 Line, Tunnel, Terminal, and Host Settings

Connect StringEnter the connect string. This modem initialization string prepares the modem for communications. It is a customized string sent with the “CONNECT” modem response code.

Display Remote IP Selects whether the incoming RING sent on the Serial Line is followed by the IP address of the caller. Default is Disabled.

3.Click Submit.

Terminal Settings

This page shows configuration settings for attaching a terminal on a serial line or the network and lets you change them as necessary.

Line Terminal Configuration

To configure a line to support an attached terminal:

1.Click Terminal on the menu and then select the line that is connected to the terminal you want to configure. The default is Line 1. Configuration is automatically selected. The Terminal on Line 1 Configuration page appears.

Figure 6-15. Terminal on Line 1 Configuration

2. Enter or modify the following settings:

XPort Pro™ User Guide 51