Lantronix 900-560 manual IP Address Filter Page Settings, Description

11 Maintenance and Diagnostics Settings

4.Enter the MAC address to add to the ARP cache.

5.Click Add after supplying both fields.

Under Current State, select Remove All to remove all entries in the ARP cache, or select Remove to remove a specific entry from the ARP cache.

IP Address Filter

The IP address filter specifies the hosts and subnets permitted to communicate with the XPort Pro.

Note: If using DHCP/BOOTP, ensure the DHCP/BOOTP server is in this list.

To configure the IP address filter:

1.Click IP Address Filter on the menu bar. The IP Address Filter page opens to display the current configuration.

Figure 11-7. IP Address Filter Configuration

2. Enter or modify the following settings:

IP Address Filter Page Settings

Description

IP Address

Enter the IP address to add to the IP filter table.

XPort Pro™ User Guide 97