Lantronix 900-560 Configuration Using Web Manager, Accessing Web Manager through a Web Browser

4. Configuration Using Web Manager

This chapter describes how to configure the XPort Pro using Web Manager, the Lantronix browser-based configuration tool. The unit’s configuration is stored in nonvolatile memory and is retained without power. All changes take effect immediately, unless otherwise noted.

Accessing Web Manager through a Web Browser

Note: You can also access the Web Manager by selecting the Web Configuration tab on the DeviceInstaller window.

To access Web Manager:

1.Open a standard web browser (such as Netscape Navigator 6.x and above, Internet Explorer 5.5. and above, Mozilla Suite, Mozilla Firefox, or Opera).

2.Enter the IP address of the XPort Pro in the address bar.

Note: The IP address may have been assigned manually using DeviceInstaller or the serial port (see the XPort Pro Quick Start) or automatically by DHCP.

3.Enter your user name and password.

Note: The factory-default user name is “admin” and the factory-default password is “PASS”.

The Web Manager home page appears.

Note: The XPort Pro Status page (the home page) shows the overall XPort Pro configuration and product information.

XPort Pro™ User Guide 22