Lantronix 900-560 manual

7 Configurable Pin Manager

To change a CP output value:

1.Select the CP from the drop-down list.

2.Enter the CP value.

3.Click Submit.

To change a CP configuration:

1.Select the CP from the drop-down list.

2.Select the CP configuration from the drop-down list.

3.(If necessary) Select the Assert Low checkbox.

4.Click Submit.

Note: These changes to a CP are not saved in FLASH. Instead, these CP settings are used when the CP is added to a CP Group. When the CP Group is saved, its CP settings are saved with it. Thus, a particular CP may be defined as “Input” in one group but as “Output” in another. Only one group c ontaining any particular CP may be enabled at once.

XPort Pro™ User Guide 57