Lantronix 900-560 manual Terminal on Line, Description, Configuration Page, Settings

6 Line, Tunnel, Terminal, and Host Settings

Figure 6-16. Terminal on Network Configuration

2. Enter or modify the following settings:

Terminal on Line	Description
Configuration Page
Settings
Terminal Type	Enter text to describe the type of terminal. The text will
	be sent to a host via IAC.
	Note: IAC means, “interpret as command.” It is a way
	to send commands over the network such as send
	break or start echoing.
Login Connect Menu	Select the interface to display when the user logs in.
	Choices are:
	Enabled = shows the Login Connect Menu.
	Disabled = shows the CLI
Exit Connect Menu	Select whether to display a choice for the user to exit
	the Login Connect Menu and reach the CLI. Choices
	are:
	Enabled = a choice allows the user to exit to the CLI.
	Disabled = there is no exit to the CLI.
Echo	Applies only to Connect Mode Telnet connections, not
	to Accept Mode. Only disable Echo if your terminal
	echoes, in which case you will see double of each
	character typed.

3. To save changes, click Submit.

XPort Pro™ User Guide 53