Lantronix 900-560 manual Description, Page Settings, 3. Line 1 Command Mode

6 Line, Tunnel, Terminal, and Host Settings

Figure 6-3. Line 1 Command Mode

2. Enter or modify the following settings:

Line –	Description
Command Mode
Page Settings
Mode	Select the method of enabling Command Mode or choose to
	disable Command Mode.
	Always = immediately enables Command Mode for the serial
	line.
	Use Serial String = enables Command Mode when the serial
	string is read on the serial line during boot time.
	Use CP Group = enables Command Mode based on the
	status of a CP Group. When the value matches the current
	value of the group, Command Mode is enabled on the serial
	line.
	Use both Serial String and CP Group = the serial string and

XPort Pro™ User Guide 36