Lantronix 900-560 manual Network Description Interface Configuration Settings

5 Network Settings

2. Enter or modify the following settings:

Network 1	Description
Interface
Configuration
Page Settings
BOOTP Client	Select On or Off. At boot up the XPort Pro will
	attempt to obtain an IP address from a BOOTP
	server.
	Notes: Overrides the configured IP address, network
	mask, gateway, hostname, and domain.
	When DHCP is On, the system automatically uses
	DHCP, regardless of whether BOOTP Client is On.
DHCP Client	Select On or Off. At boot up the XPort Pro will
	attempt to lease an IP address from a DHCP server
	and maintain the lease at regular intervals.
	Note: Overrides BOOTP, the configured IP address,
	network mask, gateway, hostname, and domain.
IP Address	Enter the XPort Pro static IP address.
	You may enter it alone, in CIDR format, or with an
	explicit mask.
	The IP address consists of four octets separated by a
	period and is used if BOOTP and DHCP are both set
	to Off. Changing this value requires you to reboot the
	XPort Pro.
	Note: When DHCP is enabled, the XPort Pro tries to
	obtain an IP address from DHCP. If it cannot, the
	XPort Pro uses an Auto IP address in the range of
	169.254.xxx.xxx.
Default Gateway	Enter the IP address of the router for this network. Or,
	clear the field (appears as <None>). This address is
	only used for static IP address configuration.
Hostname	Enter the XPort Pro hostname. It must begin with a
	letter, continue with a sequence of letters, numbers,
	and/or hyphens, and end with a letter or number.
Domain	Enter the XPort Pro's domain name.
DHCP Client ID	Enter the ID if the DHCP server uses a DHCP ID. The
	DHCP server’s lease table shows IP addresses and
	MAC addresses for devices. The lease table shows
	the Client ID, in hexadecimal notation, instead of the
	XPort Pro MAC address.
Primary DNS	IP address of the primary name server. This entry is
	required if you choose to configure DNS (Domain
	Name Server) servers.

XPort Pro™ User Guide 30