Lantronix 900-560 manual Network Terminal Configuration, Terminal on Line, Description, Settings

	6 Line, Tunnel, Terminal, and Host Settings
Terminal on Line	Description
Configuration Page
Settings
Terminal Type	Enter text to describe the type of terminal. The text will
	be sent to a host via IAC.
	Note: IAC means, “interpret as command.” It is a way
	to send commands over the network such as send
	break or start echoing.
Login Connect	Select the interface to display when the user logs in.
Menu	Choices are:
	Enabled = shows the Login Connect Menu.
	Disabled = shows the CLI
Exit Connect Menu	Select whether to display a choice for the user to exit
	the Login Connect Menu and reach the CLI. Choices
	are:
	Enabled = a choice allows the user to exit to the CLI.
	Disabled = there is no exit to the CLI.
Send Break	Enter a Send Break control character, e.g., <control>
	Y, or blank to disable.
	When the Send Break control character is received
	from the network on its way to the serial line, it is not
	sent to the line; instead, the line output is forced to be
	inactive (the break condition).
Break Duration	Enter how long the break should last in milliseconds.
Echo	Applies only to Connect Mode Telnet connections, not
	to Accept Mode. Only disable Echo if your terminal
	echoes, in which case you will see double of each
	character typed.

3. To save changes, click Submit.

Network Terminal Configuration

To configure menu features applicable to CLI access via the network:

1.Click Terminal on the menu and then click Network at the top of the page. Configuration is automatically selected. The Terminal on Network Configuration page appears.

XPort Pro™ User Guide 52