Lantronix 900-560 manual Protocol Stack Configuration, TCP Settings

11 Maintenance and Diagnostics Settings

Protocol Stack Configuration

To configure the XPort Pro network stack protocols:

1.Click Protocol Stack on the menu bar. The Protocol page appears with links to the TCP, IP, ICMP, and ARP protocols.

2.Click on one of the protocol names to see the details of the settings for that protocol.

TCP Settings

Figure 11-3. TCP Protocol Page

On the TCP page, you may modify the following settings:

￿Send RSTs:

TCP contains six control bits, with one or more defined in each packet. RST is one of the control bits. The RST bit is responsible for telling the receiving TCP stack to end a connection immediately.

Select Enabled to enable the sending of the RST flag.

CAUTION: Setting this flag may pose a security risk.

Select Disabled to disable the sending of the RST flag.

￿Ack Limit:

XPort Pro™ User Guide 94