6-10
Multiprocessor WAN Application Module User Guide
OL-4858-07
Chapter6 Command Reference
Command Details
mwam bootflash access
Note The MWAM bootflash access must be enabled if you want to operate in Supervisor mode.
To enable file transfer requests between the Supervisor bootflash and the individual processors on the
MWAM, use the mwam bootflash access command in configuration mode. To remove this
configuration, use theno form of the command.
mwam bootflash access
no mwam bootflash access
Syntax Description
Defaults MWAM bootflash access is enabled by default. To disable access, issue no mwam bootflash access.
Command Modes Configuration
Command History
Usage Guidelines Use theno form of this command to disable MWAM access to the Supervisor bootflash.
Examples The following example illustrates themwam bootflash access command:
Sup-7606(config)# mwam bootflash access
mwam bootflash
access Configures bootflash access for MWAM file transfer requests.
Release Modification
12.2(14)ZA4 This command was introduced.