6-2
Multiprocessor WAN Application Module User Guide
OL-4858-07
Chapter6 Command Reference
Processor Control Commands
Processor Control CommandsThe Processor Control (PC) commands are available when you session into MWAM processor 1 from
the Supervisor console. The PC commands provide various functions for MWAM processors.
To access the PC commands, use thesession slot command to establish a connection to processor 1.
Then log into the PC as root user with the password cisco.
•show processor
•show log
•show tech-support
•show version
•show images
•reload
•recover-ios
•normal-ios
•restore
MWAM Console CommandsThe following commands are available at the MWAM console:
•mwam config-mode
•show mwam config-mode
•logging main-cpu
•show mwam