6-25
Multiprocessor WAN Application Module User Guide
OL-4858-07
Chapter6 Command Reference Command Details
normal-ios
To set the configuration register to boot with a normal configuration, use the normal-ioscommand
available at the PC complex (processor 1 on the MWAM).
normal-ios
Syntax Description
Defaults There are no default behavior or values.
Command Modes PC command
Command History
Usage Guidelines Usethis command to set the configuration register to boot using the normal startup configuration.This
command resets the effects of therecover-ios command. It is used in Recovering from MWAM
Processor Lockout.
Note You must first establish a session to processor 1 (session slot command).
Examples The following example illustrates thenormal-ios command:
root@mwam-9#normal-ios
Base external MAC: "0003.FEAB.9FB6"
Internet Software Consortium DHCP Server V3.0.1rc6
Copyright 1995-2001 Internet Software Consortium.
All rights reserved.
For info, please visit http://www.isc.org/products/DHCP
Wrote 0 deleted host decls to leases file.
Wrote 0 new dynamic host decls to leases file.
Wrote 0 leases to leases file.
Listening on LPF/eth0/02:00:00:00:0f:00/128.0.1.0/24
Sending on LPF/eth0/02:00:00:00:0f:00/128.0.1.0/24
Listening on LPF/eth1/02:00:00:00:0f:10/128.0.2.0/24
Sending on LPF/eth1/02:00:00:00:0f:10/128.0.2.0/24
Sending on Socket/fallback/fallback-net
root@mwam-9#
normal-ios Sets the configuration register to boot with a normal configuration.
Release Modification
12.(9)ZA This command was introduced.