Chapter 6 Command Reference
Command Details
show logging
To display the slave log options that are enabled on the MWAM, use the show logging command in privileged EXEC mode.
show logging {slot slot_number summary}
Syntax Description |
| slot_number | Specifies the slot that the module is plugged into. |
|
| summary | Displays logging information for all MWAMs in the chassis. |
|
|
| |
|
|
|
|
Defaults |
| There are no default behavior or values. | |
|
|
| |
Command Modes |
| Privileged EXEC configuration. | |
|
|
|
|
Command History |
| Release | Modification |
|
|
|
|
|
| 12.2(14)ZA4 | This command was introduced. |
|
|
|
|
|
| 12.2(14)ZA5 | The output of this command was modified to incorporate improvements in |
|
|
| the display of information. |
|
|
| |
|
|
|
|
Usage Guidelines |
| Use this command to display the slave log options that are enabled. | |
|
| The following example illustrates the show logging command: | |
Examples |
| ||
|
| router# show logging slot 5 | |
CPU: 05/2 | State: ACTIVE |
| Command Active: No | |||
ttynum: |
|
| Logging Level: debugging |
| ||
timeouts: |
| 1 | logevents: | 0 |
| |
sequence errors: | 0 | reset count: | 16001 | KPA_missed: 4294967201 | ||
send seq: |
| 5 | tty recv | seq: | 0 | log recv seq: 0 |
Current queue count: | 0 | IP addr: | 172.18.48.94 |
| ||
.
.
.
Note Each processor (CPU) on the MWAM in slot 5 is displayed in the output.
Multiprocessor WAN Application Module User Guide
|
| ||
|
|
