Cisco Systems OL-4858-07 manual Recover-ios, Root@mwam-9#recover-ios

Chapter 6 Command Reference

Command Details

recover-ios

To set the configuration register to boot with a clean configuration, use the recover-ioscommand available at the PC complex (processor 1 on the MWAM).

recover-ioscomplex_number

Syntax Description	complex_number	Specifies a complex (0, 1, 2, or all) on the MWAM.
Defaults	There are no default behavior or values.

Command Modes

Command History

PC command

ReleaseModification

12.2(9)ZA This command was introduced.

Usage Guidelines	Use this command when you want to recover from a lockout condition on an MWAM processor as
	described in Recovering from MWAM Processor Lockout.
	Note	You must first establish a session to processor 1 (session slot command).
	The following example illustrates the recover-ioscommand on processor complex 2 of the MWAM in
Examples
	slot 9:
	root@mwam-9#recover-ios 2
	processing -p
	processing -c
	Setting DHCP options for processor complex 2
	Setting config-reg value to: 0x40
	Base external MAC: "0003.FEAB.9FB6"
	Internet Software Consortium DHCP Server V3.0.1rc6
	Copyright 1995-2001 Internet Software Consortium.
	All rights reserved.
	For info, please visit http://www.isc.org/products/DHCP
	Wrote 0 deleted host decls to leases file.
	Wrote 0 new dynamic host decls to leases file.
	Wrote 0 leases to leases file.
	Listening on LPF/eth0/02:00:00:00:0f:00/128.0.1.0/24
	Sending on		LPF/eth0/02:00:00:00:0f:00/128.0.1.0/24
	Listening on LPF/eth1/02:00:00:00:0f:10/128.0.2.0/24
	Sending on		LPF/eth1/02:00:00:00:0f:10/128.0.2.0/24
	Sending on		Socket/fallback/fallback-net

Multiprocessor WAN Application Module User Guide

6-24 OL-4858-07