Show log, Shows the upgrade log | Cisco Systems OL-4858-07 specification

Chapter 6 Command Reference

Command Details

show log

To show the upgrade or restart logs, use the show log command available at the PC complex (processor 1 on the MWAM).

show log {upgrade restart}

Syntax Description		upgrade	Shows the upgrade log.
		restart	Shows the MWAM and process restart log.


Defaults		There are no default behavior or values.

Command Modes

Command History

PC command

ReleaseModification

12.3(3)B1	This command was introduced.

Usage Guidelines Use this command when you want to display the contents of the upgrade log.

Note You must first establish a session to processor 1 (session slot command).

Examples	The following examples illustrate the show log command:
	root@mwam-4#show log upgrade
	Log 'upgrade' is not available.
	root@mwam-4
	root@mwam-4#show log restart
	MWAM started on Fri Jan	1	00:02:20 UTC 1988
	Restarting rcal on Fri Jan		1 00:02:24 UTC 1988
	MWAM started on Fri Jan	1	00:02:20 UTC 1988
	MWAM shutdown on Mon Jun	14 15:29:47 UTC 2004
	MWAM started on Fri Jan	1	00:02:22 UTC 1988
	root@mwam-4#

Multiprocessor WAN Application Module User Guide

6-22	OL-4858-07

Image 22

Cisco Systems OL-4858-07 manual Show log, Shows the upgrade log, Shows the Mwam and process restart log

Contents

Command Reference Following commands are available at the Supervisor console Processor Control Commands Following commands are available at the Mwam console Mwam module allowed-vlan Command Modes Command HistoryGlobal configuration ReleaseModification Module Port Vlan-based Mwam module vlan-basedMwam Module Port Vlan-based Session slot Exec mode12.29ZA This command was introduced Usage Guidelines 2003 Sup-7606#sho mwam mod 7 port 1 state Following example illustrates the show mwam module commandShow mwam module Sup-7606#sho mwam mod 7 port 1 traffic Sup-7606#sho mwam mod 7 port 3 state Multiprocessor WAN Application Module User Guide OL-4858-07 Configuration Mwam bootflash accessDefaults Command Modes Command History Sup-7606config#mwam bootflash access On the MWAM, you have configured processor 2 as follows Syntax Description DefaultsThere are no default behavior or values Logging listen mwam Additional UDP Port Mwam Processor Base UDP Port40-10000 40-10002 40-10003 40-10004 40-10005 40-10006 Execute-on Defaults Command Modes Command History Usage GuidelinesThere are no default behavior or values Privileged Exec Release Modification Sup-7600#execute-on 5 2 log show running-config Connection, use the show line linenumber commandSlot Sup-7600config#mwam module all cpu all logging error Mwam module cpu logging Sup-7600config#mwam module 5 cpu 2 logging debug Show logging Release Modification Command Reference Command Details Clear logging slot Router# clear logging slot 6 counts Show processor Counter Description Root@mwam-9# Show log Shows the upgrade logFollowing examples illustrate the show log command Shows the Mwam and process restart log Reload Recover-ios Root@mwam-9#recover-ios Following example illustrates the normal-ioscommand 12.9ZA This command was introducedNormal-ios Following example illustrates the show images command Use this command to list the image names on the MwamShow images Restore Following example illustrates the restore command Show tech-support Reporting a problemFollowing example illustrates the show tech-supportcommand Root@mwam-4#show tech-support Show version 12.31aBW This command was introduced Mwam config-modeLocal mode Syntax Description Show mwam config-mode Show Mwam Config-mode Logging main-cpu Mwam-6-4config#logging main-cpu Mwam-6-4config#logging main-cpu 10000 debug Following examples illustrate the show mwam command Show mwam 0x214800000x214FFFFF 0x0014800000x0014FFFFF OL-4858-07