Show images | Cisco Systems OL-4858-07 instruction

Chapter 6 Command Reference

Command Details

show images

To list the images stored on the MWAM, use the show images command available at the PC complex (processor 1 on the MWAM).

show images

Syntax Description This command has no arguments or keywords.

Defaults

There are no default behavior or values.

Command Modes

Command History

PC command

ReleaseModification

12.(9)ZA	This command was introduced.


Usage Guidelines		Use this command to list the image names on the MWAM.

		Note You must first establish a session to processor 1 (session slot command).

		The following example illustrates the show images command:
Examples		The following example illustrates the show images command:
		root@mwam-9#show images
		Device name			Partition#		Image name
	-----------				----------		----------
		Compact flash(cf)			6		SIMPSON_RAM.bin
		Version Information:
		Compiled Tue 19-Aug-03				13:35 by dchih
		Compact flash(cf)			6		svcmwam-js-mz.geo_t_040121
		Version Information:
		Compiled Wed 21-Jan-04				02:34 by $

AP software is c6svcmwam-js-mz.geo_t_040121.2-1-0-3b.6cpu.bin root@mwam-9#

Multiprocessor WAN Application Module User Guide

6-26	OL-4858-07

Image 26

Cisco Systems OL-4858-07 manual Show images, Use this command to list the image names on the Mwam

Contents

Command Reference Following commands are available at the Supervisor console Processor Control Commands Following commands are available at the Mwam console Mwam module allowed-vlan Command Modes Command HistoryGlobal configuration ReleaseModification Mwam Module Port Vlan-based Mwam module vlan-basedModule Port Vlan-based Session slot Exec mode12.29ZA This command was introduced Usage Guidelines 2003 Sup-7606#sho mwam mod 7 port 1 state Following example illustrates the show mwam module commandShow mwam module Sup-7606#sho mwam mod 7 port 1 traffic Sup-7606#sho mwam mod 7 port 3 state Multiprocessor WAN Application Module User Guide OL-4858-07 Configuration Mwam bootflash accessDefaults Command Modes Command History Sup-7606config#mwam bootflash access On the MWAM, you have configured processor 2 as follows Syntax Description DefaultsThere are no default behavior or values Logging listen mwam Additional UDP Port Mwam Processor Base UDP Port40-10000 40-10002 40-10003 40-10004 40-10005 40-10006 Execute-on Defaults Command Modes Command History Usage GuidelinesThere are no default behavior or values Privileged Exec Release Modification Slot Connection, use the show line linenumber commandSup-7600#execute-on 5 2 log show running-config Sup-7600config#mwam module all cpu all logging error Mwam module cpu logging Sup-7600config#mwam module 5 cpu 2 logging debug Show logging Release Modification Command Reference Command Details Clear logging slot Router# clear logging slot 6 counts Show processor Counter Description Root@mwam-9# Show log Shows the upgrade logFollowing examples illustrate the show log command Shows the Mwam and process restart log Reload Recover-ios Root@mwam-9#recover-ios Normal-ios 12.9ZA This command was introducedFollowing example illustrates the normal-ioscommand Show images Use this command to list the image names on the MwamFollowing example illustrates the show images command Restore Following example illustrates the restore command Show tech-support Reporting a problemFollowing example illustrates the show tech-supportcommand Root@mwam-4#show tech-support Show version 12.31aBW This command was introduced Mwam config-modeLocal mode Syntax Description Show mwam config-mode Show Mwam Config-mode Logging main-cpu Mwam-6-4config#logging main-cpu Mwam-6-4config#logging main-cpu 10000 debug Following examples illustrate the show mwam command Show mwam 0x214800000x214FFFFF 0x0014800000x0014FFFFF OL-4858-07