PIONEERPOS 139 +CMEE Parameters, April 15 G24-L AT Commands Reference Manual 207, At+Cmee?

Chapter 3: AT Commands Reference

Command
Type	Syntax	Response/Action	Remarks
Set	AT+CMEE=[<n>]	OK	The Set command enables or disables the
		or:	use of result code +CME ERROR: <err> as
		+CME ERROR: <err>	an indication of an error relating to the
			functionality of the G24-L.
Read	AT+CMEE?	+CMEE: <n>	The Read command returns the current
		OK	setting format of the result code.
Test	AT+CMEE=?	+CMEE: (list of	The Test command returns values
		supported <n>s)	supported by the terminal as a compound
		OK	value.

The following table shows the +CMEE parameters.

		Table 3-139: +CMEE Parameters
<Parameter>		Description
<n>	0	Disable the +CME ERROR: <err> result code and use ERROR.
	1	Enable the +CME ERROR: <err> or +CMS ERROR: <err> result codes and
	use numeric <err> values or +STK ERROR: <err> result codes and use numeric <err>
	values.
	2	Enable the +CME ERROR: <err> or +CMS ERROR: <err> result codes and
	use verbose <err> values or +STK ERROR: <err> result codes and use numeric <err>
	values.
	The default value is 0.

April 15, 2008 G24-L AT Commands Reference Manual 3-207