PIONEERPOS G24-LC manual +CNMA, New Message Acknowledgment, OK AT+CNMI=,,,1

SMS

+CMT: "+972544565034",,"04/11/04,09:48:36+08",145,4,0,0,"+97254120032",145,3

ABC

AT+CSMP=49 /*Set first octet to status report - see status report parameters in CMGW*/

OK AT+CSMP? +CSMP: 49,167,0,0

OK AT+CNMI=,,,1

OK AT+CNMI? +CNMI: 0,0,0,1,0

OK AT+CNMI=0,0,0,1,0

OK AT+CMGS="0524680592"

>HELLO +CMGS: 168

OK

+CDS: 6,168,"+972524680592",145,"05/08/02,15:20:12+08","05/08/02,15:20:14+08",0 AT+CNMI=0,0,0,2

OK AT+CMSS=296 +CMSS: 185

OK

+CDSI: "SM",6

+CNMA, New Message Acknowledgment

This command acknowledges the receipt of a +CMT and +CDS response from the terminal to the G24-L. A +CMT response receipt confirms the correct reception of a new SMS-DELIVER message, which was routed directly to the terminal. A +CDS response receipt confirms the correct reception of a new SMS-STATUS-REPORT message, which was routed directly to the terminal.

When the G24-L sends a +CDS response to the terminal, it waits a predefined timeout of 60 seconds for the +CNMA acknowledgment. The G24-L will not send another +CDS result code to the terminal before the previous one is acknowledged, or the timeout expires.

When the G24-L sends a +CMT response to the terminal, it waits a predefined timeout of 60 seconds for the +CNMA acknowledgment. The G24-L will not send another +CMT result code to the terminal before the previous one is acknowledged, or the timeout expires.

Upon receipt of the +CNMA command, the G24-L sends RP-ACK to the network. The acknowledged SM will not be saved in message storage.

If the G24-L does not receive acknowledgment within the required time, it sends RP-ERROR to the network. The G24-L automatically disables routing to the terminal by setting both <mt> and <ds> values of +CNMI to zero. The unacknowledged SM is saved in message storage.

3-84 G24-L AT Commands Reference Manual April 15, 2008