PIONEERPOS G24-LC MIPXON, Flow Control Xon, Mipconf Configure Internal TCP/IP stack, Event

	Chapter 3: AT Commands Reference
Event
+MIPXOFF: <Socket ID>
Example
+MIPXOFF:	//The G24-L detects that the accumulating buffer 1 has reached its
	Xoff watermark.

From this point, the terminal is not allowed to send data, until it receives the +MIPXON command.

MIPXON, Flow Control - Xon

This command is the unsolicited event that the G24-L sends to the terminal when it detects that it has free memory in the accumulating buffer and can process new +MIPSEND requests, after the +MIPXOFF event.

Event

+MIPXON: <Socket ID>

Example

+MIPXON: 1	//The G24-L pushed the data into the protocol stack on socket 1
	and is able to handle more data from the terminal.

MIPCONF - Configure Internal TCP/IP stack

This command allows to configure TCP stack parameters, such as retransmissions number, upper and bottom limits of retransmission timeout, close delay. It can be used to configure TCP socket

April 15, 2008 G24-L AT Commands Reference Manual 3-289