PIONEERPOS G24-LC manual +CGATT, Gprs Attach or Detach, 155 +CGQREQ Parameters

Chapter 3: AT Commands Reference

The following table shows the +CGQREQ parameters.

	Table 3-155: +CGQREQ Parameters
<Parameter>	Description
<cid>	A numeric parameter that specifies a particular PDP context definition. The value is
	from 1 to 3.
<precedence>	A numeric parameter that specifies the precedence class.
<delay>	A numeric parameter that specifies the delay class.
<reliability>	A numeric parameter that specifies the reliability class.
<peak>	A numeric parameter that specifies the peak throughput class.
<mean>	A numeric parameter that specifies the mean throughput class.

Example

AT+CGQREQ=?

+CGQREQ: ("IP"),(0-3),(0-4),(0-5),(0-9),(0-18,31)

OK AT+CGQREQ? +CGQREQ: 1,2,4,3,9,10 +CGQREQ: 2,2,4,3,9,10 +CGQREQ: 3,2,4,3,9,10

OK AT+CGQREQ=1,0,,0,0,0

OK AT+CGQREQ? +CGQREQ: 1,0,4,0,0,0 +CGQREQ: 2,2,4,3,9,10 +CGQREQ: 3,2,4,3,9,10

OK

+CGATT, GPRS Attach or Detach

This command attaches/detaches the ME to/from the GPRS service. When the command has completed, the ME remains in V.25ter command state. If the ME is already in the requested state, the command is ignored and the OK response is returned. If the requested state cannot be achieved, an ERROR or +CME ERROR response is returned. Extended error responses are enabled by the +CMEE command. Any active PDP contexts will be automatically deactivated when the attachment state changes to detached.

April 15, 2008 G24-L AT Commands Reference Manual 3-237