PIONEERPOS G24-LC manual +CALM, Alert Sound Mode, 113 +CALM Parameters

Chapter 3: AT Commands Reference

OK AT+MADIGITAL=0

OK AT+MADIGITAL? +MADIGITAL: 0 OK AT+MADIGITAL=3

ERROR AT+MADIGITAL? +MADIGITAL: 0 OK

+CALM, Alert Sound Mode

This command handles the selection of the G24-L's alert sound mode. The value of the command is saved after a power cycle.

Command Type	Syntax	Response/Action	Remarks
Set	+CALM=<mode>	OK	The Set command sets the alert sound
		+CME ERROR: <err>	mode.
Read	+CALM?	+CALM: <mode>	The Read command displays the
		+CME ERROR: <err>	current alert sound mode setting.
Test	+CALM=?	+CALM: (list of	The Test command displays the list of
		supported <mode>s)	supported modes.
		+CME ERROR: <err>

The following table shows the +CALM parameters.

		Table 3-113: +CALM Parameters
<Parameter>		Description
<mode>	Alert sound mode of the G24-L.
	0	Ring (default)
	1	Silent mode (ring prevented)

Note: Selecting the ring mode with this command retrieves the current alert volume level setting.

Example

AT+CALM=? +CALM: (0,1)

OK AT+CALM? +CALM: 0

OK AT+CALM=1

OK

April 15, 2008 G24-L AT Commands Reference Manual 3-171