PIONEERPOS G24-LC manual 82 +MBC Parameters, Battery Level Parameters, Ind, BatteryLevel

Chapter 3: AT Commands Reference

The following table shows the +MBC parameters.

		Table 3-82: +MBC Parameters
<Parameter>		Description
<Mode>	0	Stop battery charging.
	1	Start battery charging.
	2	Automatic battery charging.
<Ind>	0	Disable MBC unsolicited report (default).
	1	Enable MBC unsolicited report.
<BatteryLevel>	0-5	Battery Level values (see Table 3-83).
<Status>	The status of the battery charger:
	0	The battery is in charging process.
	1	The battery is not in charging process.

The following table shows the battery levels parameters (as defined in +CBC command.

Table 3-83: Battery Level Parameters

VCC, V		Battery Level
>3.7	5	(90%)
3.5-3.7	4	(60%)
3.4-3.5	3	(20%)
3.35-3.4	2	(10%)
3.3-3.35	1	(5%)
<3.3	0	(0%)

Example

AT+MBC?	//Read the current values.
+MBC: 0,3,2,0
OK
AT+MBC=1,1	// Start charging with unsolicited report.
OK
AT+MBC?	//Read the current values.
+MBC: 0,3,1,1
OK
+MBC: 0,3,1,1	//Unsolicited reports
+MBC: 0,4,1,1
+MBC: 0,5,1,1
AT+MBC=?	//Test Mode.
+MBC: (0-2), (0-1)
OK

April 15, 2008 G24-L AT Commands Reference Manual 3-131