PIONEERPOS G24-LC manual 158 +MGEER Parameters, April 15 G24-L AT Commands Reference Manual 241

Chapter 3: AT Commands Reference

The following table shows the +MGEER parameters.

		Table 3-158: +MGEER Parameters
<Parameter>		Description
<n>	Indicates what format of cause needs to be printed. The default value is 2.
	1	Returns numeric cause format.
	2	Returns text cause format.
<cause>	The PDP context activation reject cause.
	0	Bad SIM (user authentication failed)
	1	Roaming Not Allowed
	2	Access Class Not Allowed
	3	Network Failure
	4	Insufficient Resource
	5	All TID In Use
	6	Link EST Failed
	7	Activation Rejected By Network
	8	Lower Layer Failure
	9	Activation In Progress
	10	Unspecified
	11	Reactivation
	12	Invalid QOS
	13	MT AA Deactivation
	14	MAX Timer Expiry
	15	"Missing Or Unknown APN"
	16	LLC Or SNDCP Failure
	17	Feature Not Supported
	18	CS Transaction In Progress
	19	Primary NSAPI Being Deactivated
	20	Primary NSAPI Inactive
	21	Semantic Error In TFT Operatio
	22	Syntactical Error In TFT Operation
	23	Unknown PDP Context
	24	Semantic Errors In Packet Filters
	25	Syntactical Errors In Packet Filters
	26	PDP Context Without TFT Already Activated
	27	Feature Not Supported By Network
	28	MT Modification In Progress
	29	RAB Loss
	30	Incompatible QOS Values
	31	Activation Rejected Unspecified
	32	Service Option Not Supported
	33	Service Option Not Subscribed
	34	Service Option Temporarily Out Of Order
	35	Operator Determined Barring
	36	QOS Not Accepted
	37	NSAPI Already Used
	38	Cause Protocol Error
	254	Unspecified
	255	No Information Available

April 15, 2008 G24-L AT Commands Reference Manual 3-241