PIONEERPOS G24-LC manual +MCST, Call Status Messages, +MCST Indication, ATH No Carrier OK, +Mcst?

Call Control

+CLCC: 0

OK

AT+CLCC=1//Example with unsolicited indication

OK ATD055490698;

OK

+CLCC: 1,0,2,0,0,"055490698",129,"Alpha"

+CLCC: 1,0,3,0,0,"055490698",129," Alpha "

OK

+CLCC: 1,0,0,0,0,"055490698",129," Alpha "

ATH

NO CARRIER OK

+CLCC: 1,0,6,0,0,"055490698",129," Alpha

+MCST, Call Status Messages

This command displays the current state of the call processing, and also enables/disables the unsolicited indication of any change in the call processing state.

Command Type	Syntax	Response/Action	Remarks
Set	+MCST=<n>	OK	The Set command Enables/disables the
		or:	unsolicited call status messages.
		+CME ERROR: <err>
Read	+MCST?	+MCST: <state>	The Read command returns the current
		OK	call processing state.

+MCST Indication

When a change in call state occurs and the +MCST is set to n=1 the G24-L will give the following indication:

+MCST: <state>

3-42 G24-L AT Commands Reference Manual April 15, 2008