PIONEERPOS G24-LC manual +MGGIND, GSM/GPRS Service Indicator, 91 +MGGIND Parameters, AT+ Mggind ?

Hardware Information

+MGGIND, GSM/GPRS Service Indicator

This command configures the service indicator line of pin 49 of the 70 pin connector to be GPRS or GSM registration indicator.

The IO line (pin 49) function according to the current registration state (in service or not) of the specific service indicator configuration.

Note: IO line (pin 49) outcome depends on +MCWAKE configuration.

Command Type	Syntax	Response/Action
Set	AT+MGGIND=<state>	OK
		or:
		+CME ERROR: <err>
Read	AT+ MGGIND ?	+MGGIND: <state>
		OK
		or:
		+CME ERROR: <err>
Test	AT+ MGGIND =?	+MGGIND: (list of supported
		<state>s)
		OK

The following table shows the +MGGIND parameters.

		Table 3-91: +MGGIND Parameters
<Parameter>		Description
<state>	0	GPRS registration indicator.
	1	GSM registration indicator.

Example

AT+MGGIND=0

OK AT+MGGIND?

OK +MGGIND: 0 AT+MGGIND=1

OK AT+MGGIND? +MGGIND: 1

OK AT+MGGIND=? +MGGIND: (0-1)

OK

3-140 G24-L AT Commands Reference Manual April 15, 2008