PIONEERPOS G24-LC manual +MPING, Start Ping Execution Icmp Protocol, Tos, +Mping

GPRS

+MIPRTCP:

2,130,484541443E3C5449544C453E333032204D6F7665643C2F5449544C453E3C2F484541443E3C424F44

593E0A3C48313E333032204D6F7665643C2F48313E0A54686520646F63756D656E7420686173206D

+MIPRTCP:

2,50,6F7665640A3C4120485245463D22687474703A2F2F7777772E676F6F676C652E636F2E696C2F63786

665723F633D505245462533443A544D253344313131393531343833323A5325334467384A637631

+MIPRTCP:

2,0,426A5458472D30636A5926616D703B707265763D2F223E686572653C2F413E2E0D0A3C2F424F44593

E3C2F48544D4C3E0D0A +MIPSTAT: 2,1,40

+MPING, Start Ping Execution (ICMP Protocol)

This command allows to verify IP connectivity to another remote machine (computer) by sending one or more Internet Control Message Protocol (ICMP) Echo Request messages. The receipt of corresponding Echo Reply messages are displayed, along with round trip times.

Valid IP address must be obtained using AT+MIPCALL command prior to starting ping execution.

Only one ping request execution will be allowed at any given moment.

Command Type	Syntax	Response/Action	Remarks
Set	+MPING=<mode	OK	The set command
	>[,<"Destination	or:	shall send a <count>
	IP/hostname">[,<	+CME ERROR: <err>	Internet Control
	count>		Message Protocol
	[,<size>[,<TTL>[,		(ICMP) Echo Request
			messages to a target
	<TOS>
			node defined by
	[,<TimeOut>]]]]]]
			<"Destination
			IP/hostname">
			parameter.
			If <mode> is equal 0,
			no parameters trailing
			<mode> parameter
			are allowed,
			otherwise ERROR
			message will be
			reported to DTE. If
			<mode> is equal 0,
			MS will abort sending
			Echo Request
			messages if ping
			request is in process,
			otherwise ERROR
			message will be
			reported to DTE.
Unsolicited		+MPING:	The receipt of
Response		<"Destination IP">,<type>,<code>	corresponding ICMP
		[,<RTT>]	Echo Reply messages
			will be displayed
			within unsolicited
			responses, along with
			round trip times.

3-292 G24-L AT Commands Reference Manual April 15, 2008