Chapter 3: AT Commands Reference

The following table shows the +CRSL parameters.

 

 

 

Table 3-101: +CRSL Parameters

 

 

 

 

 

 

 

 

 

 

 

 

<Parameter>

 

Description

 

 

 

 

 

 

 

 

 

 

 

 

<level>

0

Mute

 

1-7 Ringer sound level (1 is lowest; 7 is default after flex)

Example

AT+CRSL? +CRSL: 7

OK AT+CRSL=? +CRSL: (0-7)

OK AT+CRSL=5

OK

+CLVL, Loudspeaker Volume

This command sets the volume of the internal loudspeaker (which also affects the key feedback tone) of the G24-L.

This command is applicable for Analog and Digital modes.

Note: The +CLVL command does not control the alert speaker.

In this command, the new value remains after power cycle.

The +CLVL command can be used even when the SIM is not inserted.

 

 

 

 

Command Type

Syntax

Response/Action

Remarks

 

 

 

 

 

 

 

 

Set

+CLVL=<level>

OK

The Set command sets the internal

 

 

+CME ERROR: <err>

loudspeaker volume level.

 

 

 

 

Read

+CLVL?

+CLVL: <level>

The Read command displays the

 

 

+CME ERROR: <err>

current internal loudspeaker volume

 

 

 

setting.

Test

+CLVL=?

+CLVL: (list of

The Test command displays the

 

 

supported <level>s)

possible loudspeaker volume settings.

 

 

+CME ERROR: <err>

 

 

 

 

 

 

 

 

 

April 15, 2008

G24-L AT Commands Reference Manual

3-159

Page 223
Image 223
PIONEERPOS G24-LC manual +CLVL, Loudspeaker Volume, 101 +CRSL Parameters, Parameter Description Level