PIONEERPOS G24-LC ?, Return the Value of the Last Updated S-register, 133 &F Parameters, At?

Modem Configuration and Profile

?, Return the Value of the Last Updated S-register

This command displays the most recently updated value stored in an S-register.

Command Type	Syntax	Response/Action	Remarks
Read	AT?	000	The Read command returns the value
		OK	of the last updated S-register.

Example

AT?

000 OK AT? 003 OK ATS36=5

OK

AT?

005 OK

&F, Set to Factory Defined Configuration

This command restores the factory default configuration profile. The G24-L only supports one factory default profile, 0.

Command Type	Syntax	Response/Action	Remarks
Set	AT&F<value>	OK
		or:
		+CMS ERROR: <err>
Read	AT&F?	<current profile
		number>
Test			The Test command for &F is not
			defined by ITU, and therefore is not
			supported by the G24-L. The G24-L
			returns an error.

The following table shows the &F parameters.

		Table 3-133: &F Parameters
<Parameter>		Description
<value>	0	Factory default configuration profile. This is the only value supported.

3-198 G24-L AT Commands Reference Manual April 15, 2008