PIONEERPOS G24-LC manual NOP Compatible, Ignored Compatible Only Commands, Command Description

NOP - Compatible

NOP - Compatible

IGNORED (Compatible Only) Commands

The following commands return OK, but do not execute any operation. They are only used to provide backward compatibility.

Command	Description
F	Selects the line modulation standard
L	Monitors the speaker loudness
M	Monitors the speaker mode
N	Enables auto mode
P	Selects pulse dialing
T	Selects tone dialing
W	Wait for dial tone
Y	Disconnects on long space
&G	Selects the guard tone
&J	Jack type selection
&L	Leased line operation
&M	Asynch/synch mode connection
&P	Selects pulse dialing
&Q	Communications mode options
&R	Selects the CTC controls
&S	Defines the DSR behavior
&T	Selects tone dialing
\A	Sets the maximum MNP block size
\G	Sets the use of the Xon/Xoff flow control
\J	Adjusts the terminal auto rate
\K	This command is supported for backward compatibility only, and has no effect.
\N	Displays the link type
%C	Enables/disables data compression
\B	Transmits break to remote
\K	Breaks control
+CBAND	Changes band frequencies

3-304 G24-L AT Commands Reference Manual April 15, 2008