PIONEERPOS G24-L Setting Text Mode Parameters Using AT+CMGW and AT+CMGS, AT+CNMI=,1, AT+CMGR=4

Chapter 4: Using the Commands

Setting the Notification Indication for Incoming Messages (Using AT+CNMI)

AT+CNMI=,1	//To receive indications of new incoming MT messages, the second
parameter of +CNMI should be set to 1
OK
+CMTI: "SM",4	//When a new MT message is received, the unsolicited response
+CMTI will be displayed, denoting the message index
AT+CMGR=4	//Use the new message index to read it
+CMGR: "REC UNREAD","+97254565132",,"05/02/13,07:15:36+08"
<message body>
OK
AT+CMGD=4	//Delete the message after reading it
OK

Another Possible Option for Setting the CNMI Notification Indication

AT+CNMI=,2//To have new incoming MT messages displayed on the terminal, the second parameter of +CNMI should be set to 2

OK

+CMT: "+97254565132","03/3/24,15:38:55"

<message contents>//When a new MT message is received, the unsolicited response +CMT is displayed along with the message

AT+CNMA//To acknowledge receipt of a message, use the AT+CNMA command within 60 seconds of the +CMT unsolicited response

OK

The acknowledged message is not saved in the database. If the +CMT unsolicited response is not acknowledged within 60 seconds, the new message is saved in database.

Setting TEXT Mode Parameters (Using AT+CMGW and AT+CMGS)

AT+CSMP?

+CSMP=17,167,0,0

OK AT+CMGW="0544565034"

>text is entered <ctrl z> +CMGW: 141

OK AT+CSDH=1

OK AT+CMGR=141

+CMGR: "STO UNSENT","0544565034",,,129,17,0,0,167,"+ 97254120032",145,<messsage length> <message body>

AT+CSMP= 1,256,0,0

+CMS ERROR: numeric parameter out of bounds

April 15, 2008 G24-L AT Commands Reference Manual 4-11