PIONEERPOS G24-LC manual 14 +CBST Parameters, Parameter Description Speed, Name

Call Control

Command	Syntax	Response/Action	Remarks
Type
Read	AT+CBST?	+CBST:
		<speed>,<name>,<ce>
		OK
Test	AT+CBST=?	+CBST: (list of	The Test command returns values
		supported	supported by the MA as compound
		<speed>s),(list of	values.
		supported
		<name>s),(list of
		supported <ce>s)
		OK

The following table shows the +CBST parameters.

		Table 3-14: +CBST Parameters
<Parameter>		Description
<speed>	0 - Auto-bauding (automatic selection of the speed; this setting is possible in case of
	3.1 kHz modem and non-transparent service)
	6 - 4800 bps (V.32)
	7 - 9600 bps (V.32)
	14	- 14400 bps (V.34)
	68	- 2400 bps (V.110 or X.31 flag stuffing)
	70	- 4800 bps (V.110 or X.31 flag stuffing)
	71	- 9600 bps (V.110 or X.31 flag stuffing)
	75	- 14400 bps (V.110 or X.31 flag stuffing)
	The default value is 7.
	Note: Currently the G24-L supports:
		2 baud rates: 4800 and 9600 bps
		2 protocols: V.110 and V.32
<name>	0 - Data circuit asynchronous (UDI or 3.1 kHz modem)
	1 - Data circuit synchronous (UDI or 3.1 kHz modem)
	The default value is 0.
<ce>	0 - Transparent (Reserved for future implementation)
	1 - Non-transparent (default)

Example

AT+CBST=?

+CBST: (000,004,006,007,014,068,070,071,075),(000-001),(000-003)

OK AT+CBST? +CBST: 007,000,001

OK AT+CBST=6

OK AT+CBST? +CBST: 006,000,001

OK

3-32 G24-L AT Commands Reference Manual April 15, 2008