PIONEERPOS G24-LC manual 19 +CLCC Parameters, Parameter Description State, Idx, Dir, Mpty

Chapter 3: AT Commands Reference

The following table shows the +CLCC parameters.

		Table 3-19: +CLCC Parameters
<Parameter>		Description
<state>	0	Disable CLCC unsolicited indication
	1	Enable CLCC unsolicited indication
	The default value is 0.
<idx>	Integer type, call identification number
<dir>	0	Mobile originated call (MO)
	1	Mobile terminated call (MT)
<call state>	The state of the call
	0	Active
	1	Held
	2	Dialing (MO call)
	3	Alerting (MO call)
	4	Incoming (MT call)
	5	Waiting (MT call)
	6	Released
<mode>	Bearer/Teleservice
	0	Voice Call
	1	Data
	2	Fax
<mpty>	Multiparty status
	0	Call is not part of a multiparty call
	1	Call is one of multiparty call parties
<number>	Phone number in the format specified by <type>.
	Contains a string of up to 32 characters.
<type>	Phone number display format.
	Type of address octet in integer format (refer to GSM 04.08 [8] subclause 10.5.4.7)
	129	Local number
	145 International number with access character +
<alpha>	Text representation of the phone book entry.
	String type alphanumeric representation of <number> corresponding to the entry
	found in the phone book.
	Contains a string of up to 20 characters.

Note: When a mobile-originated call is routed to PSTN (PABX), no ALERT indication is prompted.

Example

AT+CLCC=? +CLCC: (0,1)

OK AT+CLCC

+CLCC: 1,0,0,0,0,"01256316830",129,"Shmuel"

OK AT+CLCC?

April 15, 2008 G24-L AT Commands Reference Manual 3-41