PIONEERPOS G24-LC manual +CMGF, Message Format, 42 +CPMS Parameters, 43 +CMGF Parameters

Chapter 3: AT Commands Reference

The following table shows the +CPMS parameters.

	Table 3-42: +CPMS Parameters
<Parameter>	Description
<mem1>	Memory from which messages are read and deleted.
	Supported values are: "MT","SM","ME","BM".
	The default value at power-up is "MT".
<mem2>	Memory to which writing operation is made.
	Supported value is: "ME".
	The default value at power-up is "ME".
<mem3>	Memory to which received SMS are stored (unless forwarded directly to TE).
	Supported value is: "SM".
	The default value at power-up is "SM".
"BM"	Reserved for future implementation
"ME"	ME message storage
"MT"	All storages
"SM"	SIM message storage

+CMGF, Message Format

This command is a basic command. The Set command handles the selection of the message format used with send, list, read and write commands, as well as the format of unsolicited result codes resulting from message receipts. The G24-L supports both PDU mode (where entire TP data units are used) and text mode (where the body of the message and its headers are given as separate parameters).

Command Type	Syntax	Response/Action	Remarks
Set	+CMGF=<mode>	OK	The Set command sets the message
		or:	format to use.
		+CMS ERROR: <err>
Read	+CMGF?	+CMGF:<mode>	The Read command displays the
			current message format.
Test	+CMGF=?	+CMGF:(list of	The Test command lists all the
		supported <mode>s)	supported message formats.

The following table shows the +CMGF parameters.

		Table 3-43: +CMGF Parameters
<Parameter>		Description
<mode>	Message format:
	0	PDU mode (default)
	1	Text mode

April 15, 2008 G24-L AT Commands Reference Manual 3-77