Modem Configuration and Profile

The following table shows the +MSCTS parameters.

 

 

Table 3-138: +MSCTS Parameters

 

 

 

<Parameter>

 

Description

 

 

 

 

 

 

<control>

0

In Normal Mode: The CTS is used for Flow Control

 

In Sleep mode: The CTS is inactive.

 

1

Wakeup In line is Active: The CTS is used for Flow Control.

 

Wakeup In line is Inactive: The CTS is inactive.

 

The default value is 0.

 

 

 

 

 

 

Example

AT+MSCTS = ? +MSCTS: (0-1)

OK AT+MSCTS? +MSCTS: 0

OK AT+MSCTS = 1

OK ATS102? 1

OK

Note: This means that by waking up, the CTS line will stay OFF and it can be activated by the Wakeup IN Line interrupt only.

Error Handling Commands

+CMEE, Report Mobile Equipment Error

The Set command disables or enables the use of result code +CME ERROR: <err> as an indication of an error relating to the functionality of the G24-L. When enabled, G24-L-related errors cause a +CME ERROR: <err> final result code instead of the regular ERROR final result code. Usually, ERROR is returned when the error is related to syntax, invalid parameters or terminal functionality.

For all Accessory AT commands besides SMS commands, the +CMEE set command disables or enables the use of result code +CME ERROR: <err> as an indication of an error relating to the functionality of the G24-L. When enabled, G24-L related errors cause a +CME ERROR: <err> final result code instead of the regular ERROR result code.

For all SMS AT commands that are derived from GSM 07.05, the +CMEE Set command disables or enables the use of result code +CMS ERROR: <err> as an indication of an error relating to the functionality of the G24-L. When enabled, G24-L-related errors cause a +CMS ERROR: <err> final result code instead of the regular ERROR final result.

3-206

G24-L AT Commands Reference Manual

April 15, 2008

Page 270
Image 270
PIONEERPOS G24-LC manual Error Handling Commands, +CMEE, Report Mobile Equipment Error, 138 +MSCTS Parameters