PIONEERPOS G24-LC manual 211 +MIPCFF Parameters, Parameter Description Value Socketid, At+Mipcff?

GPRS

Command Type	Syntax	Response/Action	Remarks
Set	+MIPCFF = <Socket	Comment: IP in IP CIDR
	ID>,<CmdType>,["<IP>"]	presentation
		OK
		or:
		+CME: <error code>
Read	AT+MIPCFF?	+MIPCFF:
		1,<STATUS>,<IP1.1>,<IP1.2….
		<IP1.n>
		+MIPCFF:
		2,<STATUS>,<IP2.1>,<IP1.2….
		<IP2.n>
		+MIPCFF:
		3,<STATUS>,<IP3.1>,<IP1.2….
		<IP3.n>
		+MIPCFF:
		4,<STATUS>,<IP4.1>,<IP1.2….
		<IP4.n>
Test	AT+MIPCFF =?	+MIPCFF=(1-4),(0-4),("IP in
		CIDR notation")
		OK
		or:
		+CME: <error code>

The following table shows the +MIPCFF parameters.

Table 3-211: +MIPCFF Parameters

<Parameter>	Description		Value
<Socket_id>	Identification Number of Sockets.	0	- Invalid socket nmber.
		1, 2 ... Max (=4).
<CmdType>	Operation that should be	0	- Disable filtering.
	accomplished.	1	- Enable filtering.
		2	- Add IP to white list.
		3	- Remove IP from white list.
		4	- Clear IP white list.
<IP>	IP for an allowed node.	IP in format
		AAA.BBB.CCC.DDD. The range
		of each octant is 0-255. Value can
		be written in 1,2,3 digits.
		Fixed bit A: The range is 1 - 32.
		Value can be written in 1 or 2
		digits.
<Status>	Indicate filtering status on socket.	0	- Disabled.
		1	- Enabled.
		2- Not applicable (when socket is
		opened as client).

3-302 G24-L AT Commands Reference Manual April 15, 2008