PIONEERPOS G24-LC manual +Mipstat

		Appendix A: Reference Tables
Table A-1: AT Commands (Alphabetical) (Cont.)
AT Command	Description	Page
+MIPSTAT	This unsolicited event is sent to	Page 3-288
	the terminal indicating a change
	in link status.
+MIPXOFF	This unsolicited event is sent to	Page 3-288
	the terminal to stop sending data.
+MIPXON	This unsolicited event is sent to	Page 3-289
	the terminal when the G24-L has
	free memory in the accumulating
	buffer.
+MMAD	This command reads and	Page 3-149
	monitors digital value from a
	specified ADC.
+MMAR	This command changes the status	Page 3-101
	of an SMS message in the G24-L
	memory from "REC UNREAD"
	to "REC READ".
+MMICG	This command handles the	Page 3-172
	selection of microphone gain
	values.
+MMGL	This command displays a list of	Page 3-89
	SMS messages stored in the
	G24-L memory.
+MMGR	This command enables the user	Page 3-94
	to read selected SMS messages
	from the G24-L memory.
+MPCMC	This command defines whether	Page 3-153
	the PCM clock is generated
	continuously or not, when
	module is in digital audio mode.
+MPING	This command will allow	Page 3-292
	verifying IP connectivity to
	another remote machine
	(computer) by sending one or
	more Internet Control Message
	Protocol (ICMP) Echo Request
	messages.
+MPINGSTAT	This is the unsolicited response	Page 3-296
	that the G24-L sends to the
	terminal to inform of ping
	execution status update and
	provides summary statistics of
	ping request when ping request
	execution is completed.
+MRST	This command enables customer	Page 3-143
	software to perform a hard reset
	to the G24-L unit.

April 15, 2008 G24-L AT Commands Reference Manual A-13