PIONEERPOS G24-LC manual +CLIR, Calling Line Identification Restriction

Chapter 3: AT Commands Reference

Example

AT+CCFC=? +CCFC: (0-5)

OK AT+CCFC=0,3,"01256316830",129,1

OK

AT+CCFC=1,3,"0545658278",129,1 //Register UC forward-to of all classes.

OK

AT+CCFC=1,1	//Activate UC forward-to of all classes.
OK
AT+CCFC=1,2	//Interrogate reason not-reachable of all classes.
+CCFC: 1,1,"+97254151200",145
+CCFC: 0,2,"",0
+CCFC: 0,4,"",0
OK	//For <reason>=3, forward only voice calls is activated.
AT+CCFC=4,2	//Interrogate reason all-call-forwarding for all classes.

+CME ERROR: no network service //Interrogation of <reason>=30 is not supported by network.

AT+CCFC=2,3,"+972545658278"
OK
AT+CCFC=2,0	//Disable call-forwarding for reason no-reply of all classes.

OK AT+CCFC=2,2

+CCFC: 0,1,"+972545658278",145,,25

+CCFC: 0,2,"+972545658278",145,,25

+CCFC: 0,4,"+972545658278",145,,25

OK

+CLIR, Calling Line Identification Restriction

This command instructs the G24-L to query, enable or disable the presentation of the CLI (calling line ID) of a MO call to the called party. The restriction of the CLI (disable presentation) is dependent both on the G24-L and on the network.

The network enables three possible provisions of CLIR:

•Not provisioned (CLIR Off - presentation allowed)

•Provisioned permanently

•Provisioned with Temporary mode

The provision is fixed and cannot be changed by an AT command.

Temporary Mode:

Temporary mode can be in one of two states:

•A - Presentation restricted (CLIR On) as default.

•B - Presentation allowed (CLIR Off) as default. A subscriber to Temporary mode always has a default subscription to state A or B. Temporary-mode provisioning means that the terminal can request the G24-L to switch the default mode from A to B, and vice versa.

April 15, 2008 G24-L AT Commands Reference Manual 3-29