Eagle Electronics 350 S/MAP manual Sonar Simulator, Stop Chart

Sonar Simulator

This unit has a built-in simulator that will allow you to practice as though you were on the water. All sonar features and functions will be useable during a simulation. When in simulator mode, you will see [Simulator Mode] in the Sonar Page title bar. To use the simulator:

1.From the Sonar Page, press MENUMENU↓ to SONAR SETUPENT.

2.Select SONAR SIMULATOR ON and press ENT. If you want to simulate your position, highlight SIMULATE POSITION and press ENT, which will turn on the GPS Simulator.

NOTE:

If you turn on your unit before attaching a transducer, it may enter a demo mode. The words demo mode flash on the bottom of the screen and a sonar chart will play. Unlike the simulator, the demo mode is for demonstration only and will automatically stop as soon as you turn on the unit with a transducer attached. The simulator will continue to function normally.

Stop Chart

If you are running multiple units on a boat, there are times when you may want to turn off the sonar. This command turns off the sonar and stops the chart from scrolling. Sonar restarts automatically each time you turn on your unit.

Press MENU↓ to STOP CHARTENTEXIT.

To turn the sonar on again, repeat the step above.

79