Eagle Electronics 350 S/MAP Navigating Trails, To turn trail display on or off, Visual Trailing

To turn trail display on or off:

1.Press MENUMENU↓ to MY TRAILSENT.

2.Press ↓ to enter the Saved Trail list, then use ↑ ↓ to select the de- sired Trail NameENT.

3.Press ↓ → to VISIBLEENT. To return to the main page display, press EXIT repeatedly.

Navigating Trails

There are three methods for following a trail: visual trailing, navigat- ing a trail (forward) and backtracking a trail (backward). Try each method to see which you prefer.

Visual trailing is the simplest method. It uses only the Map Page and requires no menu commands at all. The technique works the same if you are running a trail forward (from start to end) or backward (from end to start.) Visual trailing, however, provides no navigation informa- tion during the trip, such as the time to your destination.

The other two methods provide a full range of navigation data and work with both the Map Page and Navigation Page. The only difference between them is navigating a trail follows a trail forward (from start to end) while backtracking follows a trail in reverse (from end to start.)

When hiking at walking speed with a hand-held GPS, we often just use visual back trailing because it is a bit better at following each little turn on a foot path. At faster speeds, such as the highway or on the wa- ter, the Navigate Trail and Backtrack Trail commands are handy.

Visual Trailing

1.On the Map Page, zoom (ZIN or ZOUT) so your flashing trail is visible.

2.Begin moving and watch the Map Page. Walk or steer so that your current position arrow traces along the trail you have just made.

110