Route Planning command on Main Menu (left). Routes menu (center);

Edit Route menu (right). Navigate Route command is selected.

2.Press to select route nameENTENT.

3.Upon arrival at your destination, cancel navigation:

press MENUMENUto CANCEL NAVIGATIONENTto YESENT.

The following figures show what the Navigation Page and Map Page look like while navigating a route.

Figure 1.

 

Figure 2.

 

 

 

Fig. 1 shows the Navigation Page at the start of a route, heading straight for the first waypoint (Wpt 1). In Fig. 2, the traveler has arrived at Wpt 1; the arrival alarm has been triggered and the bearing arrow on the com- pass rose has turned to point toward Wpt 2, off to the northeast.

123

Page 131
Image 131
Eagle Electronics 350 S/MAP manual 123