NOTE:
When the position format is changed, it affects the way all positions are shown on all screens. This includes waypoints.
To change the coordinate system, press ENT while COORD SYSTEM is high- lighted at the top of the Coordinate System menu. Use ↑ ↓ arrow keys to select the desired format and press ENT.
To setup Loran TD:
1.From the Coordinate System menu, press ↓ to SETUP LORAN TD and press ENT.
NOTE:
If the Loran TD conversion is chosen, you must enter the local Lo- ran chain identification for the master and slaves.
2.To access the Loran Chain, Secondary 1 or Secondary 2 menus, high- light the category and press ENT. Use the ↑ ↓ keys to choose the desired setting and press ENT. Press EXIT to close the menu.
Setup Loran TD highlighted on Coordinate System menu (left). Con-
