PIONEERPOS G24-LC manual April 15 G24-L AT Commands Reference Manual 127, +Mfs?

Chapter 3: AT Commands Reference

This command is a non-basic command, which means that the G24-L module rejects the command with an appropriate error message when the SIM is not present and/or the phone is in lock state.

Command Type	Syntax	Response/Action	Remarks
Set	+MFS=<freq>	OK	This command enables you to change
	[,<mode>]	or:	and store in Flex the new values of
		+CME ERROR: <err>	Frequency of Search <freq> and
			Search mode <mode>.
			If only the <freq> value is given, then
			the Set command is interpreted as
			follows:
			• Store new <freq> value. The
			<mode> value remains unchanged.
			If <freq> and <mode> values are
			given, then the Set command is
			interpreted as follows:
			• Store new <freq> and <mode>
			values.
			Otherwise, an error message is sent to
			the DTE.
			Note: If the phone is not registered,
			then a set operation of Search
			mode to Manual is refused and
			ERROR is sent to the DTE.
Read	+MFS?	+MFS: <freq>,<mode>	The Read command returns the current
		OK	settings for values of <freq> and
		or:	<mode>.
		+CME ERROR: <err>
Test	+MFS=?	+MFS: (List of	The Test command returns the possible
		supported <freq>,(List	<freq> and <mode> values.
		of supported <mode>s)
		OK
		or:
		+CME ERROR: <err>

April 15, 2008 G24-L AT Commands Reference Manual 3-127