PIONEERPOS G24-L +CRTT, Ring Type Selection, 115 +CRTT Parameters, Parameter Description RingType

Chapter 3: AT Commands Reference

+CRTT, Ring Type Selection

This command plays one cycle of a ring tone, stops the cycle in the middle and sets the ring tone to be used.

Command
Type	Syntax	Response/Action	Remarks
Set	AT+CRTT=	OK	The Set command sets the ring type
	<RingTypeNumber>,	or:	and operation.
	<operation>	+CME ERROR: <err>
Read	AT+CRTT?	+CRTT:	The Read command returns the ring
		<RingTypeNumber>	type number.
		OK
		or:
		+CME ERROR: <err>
Test	AT+CRTT=?	+CRTT: (list of	The Test command returns the list of
		supported	supported tone type numbers and
		<RingTypeNumber>s),	operations.
		(list of supported
		<operation>s)
		OK
		or:
		+CME ERROR: <err>

The following table shows the +CRTT parameters.

		Table 3-115: +CRTT Parameters
<Parameter>		Description
<RingType	Ring tone styles (see Table 3-116)
Number>
<operation>	Play or set a tone
	0	Play (play one cycle)
	1	Set
	2	Stop

April 15, 2008 G24-L AT Commands Reference Manual 3-173