PIONEERPOS G24-LC manual S102, S24, S94, S96

AT Commands Alphabetical Summary

Table A-1: AT Commands (Alphabetical) (Cont.)

AT Command	Description	Page
N	This command is supported for	Page 3-304
	backward compatibility only, and
	has no effect.
O	This command returns a phone to	Page 3-33
	the Online Data mode and issues
	a CONNECT or CONNECT
	<text> result code.
P	This command is supported for	Page 3-304
	backward compatibility only, and
	has no effect.
Q	This command determines	Page 3-191
	whether to output/suppress the
	result codes.
RING	This unsolicited event is received	Page 3-17
	when an incoming call (voice,
	data or fax) is indicated by the
	cellular network.
S102	This S-register sets the value of	Page 3-203
	the delay before sending the data
	to the terminal.
S24	This S-parameter	Page 3-202
	activates/disables the Sleep
	mode. If the parameter value is
	greater than 0, it represent the
	number of seconds till the G24-L
	enters sleep mode.
S94	This S-parameter represents the	Page 3-161
	Boolean status, On/Off, of the
	sidetone feature.
S96	This S-parameter represents the	Page 3-162
	Boolean status, On/Off, of the
	echo cancelling feature in the
	handsfree.
Sn	This command reads/writes	Page 3-194
	values of the S-registers, and
	includes registers 1-49.
T	This command is supported for	Page 3-304
	backward compatibility only, and
	has no effect.
V	This command determines the	Page 3-190
	response format of the data
	adapter and the contents of the
	header and trailer transmitted
	with the result codes and
	information responses.

A-16 G24-L AT Commands Reference Manual April 15, 2008