PIONEERPOS G24-LC Set Event List Parameters, April 15 G24-L AT Commands Reference Manual 267

Chapter 3: AT Commands Reference

The following table shows the Set Event List parameters.

		Table 3-189: Set Event List Parameters
<Parameter>				Description
<Result>	5	User Activity event
	6	Idle Screen Available event
	8	Language Selection event
	9	Browser Termination event
<Data>	None	User Activity event
	None	Idle Screen Available event
	0	Browser Termination event (User terminated)
	1	Browser Termination event (Error terminated)
	4	Language Selection event, with string coded as follows:
		Byte(s)	Description	Length
		1	Language tag	1
		2	Length=’02’	1
		3-4	Language	2

Note: Each language code consists of a pair of alphanumeric characters, defined in ISO 639 [4]. Each character is coded on one byte using the SMS default 7-bit coded alphabet, as defined in TS 23.038, with bit 8 set to 0. For a list of language codes, refer to the section that follows.

April 15, 2008 G24-L AT Commands Reference Manual 3-267