PIONEERPOS G24-LC Call Status Messages, +CPAS, Phone Activity Status, 18 +CPAS Parameters

Chapter 3: AT Commands Reference

Call Status Messages

+CPAS, Phone Activity Status

This command displays the current activity status of the G24-L, for example, call in progress, or ringing.

Command Type	Syntax	Response/Action	Remarks
Execute/Read	AT+CPAS	+CPAS: <pas>	The Execute and Read commands
	AT+CPAS?	OK	return the activity status <pas> of the
		or:	G24-L. They can be used to interrogate
			the G24-L.
		+CME ERROR: <err>
Test	AT+CPAS=?	+CPAS: (list of
		supported <pas>s)
		OK
		or:
		+CME ERROR: <err>

The following table shows the +CPAS parameters.

	Table 3-18: +CPAS Parameters
<Parameter>	Description
<pas>	0 - Ready - The G24-L allows commands from the terminal
	2 - Unknown - The G24-L is not guaranteed to respond to instructions
	3 - Ringing (MT calls) - The G24-L is ready for commands from the terminal, but the
	ringer is active
	4 - Call in progress - The G24-L is ready for commands from the terminal, but a call is
	in progress
Example
AT+CPAS
+CPAS: 0
OK
AT+CPAS=?
+CPAS: (0,2-4)
OK
AT+CPAS?
+CPAS: 4
OK
AT+CPAS	//Voice call active state
+CPAS: 4
OK

April 15, 2008 G24-L AT Commands Reference Manual 3-39