PIONEERPOS G24-LC manual 157 +CGADDR Parameters, PDPaddress, Crlf+Cgpaddr, +Cgpaddr=?

Chapter 3: AT Commands Reference

The test command returns a list of defined <cid>s.

Command Type	Syntax	Response/Action	Remarks
Set	+CGPADDR=[<cid>	+CGPADDR: <cid>,<PDP_addr>
	[,<cid> [,…]]]	[<CR><LF>+CGPADDR:
		<cid>,<PDP_addr>
		[...]]
Test	+CGPADDR=?	+CGPADDR: (list of defined <cid>s)

The following table shows the +CGPADDR parameters.

	Table 3-157: +CGADDR Parameters
<Parameter>		Description
<cid>		A numeric parameter which specifies a particular PDP
		context definition (see the +CGDCONT and +CGDSCONT
		commands). If no <cid> is specified, the addresses for all
		defined contexts are returned.
< PDP_address>		A string that identifies the MT in the address space
		applicable to the PDP. The address may be static or dynamic.
		For a static address, it will be the one set by the
		+CGDCONT and +CGDSCONT commands when the
		context was defined. For a dynamic address it will be the one
		assigned during the last PDP context activation that used the
		context definition referred to by <cid>. <PDP_address> is
		omitted if none is available.

Example

AT+CGPADDR=? +CGPADDR: (1,2,3)

OK AT+CGPADDR=1 +CGPADDR: 1,0.0.0.0

OK

April 15, 2008 G24-L AT Commands Reference Manual 3-239