PIONEERPOS G24-LC manual +CLIP Parameters, Subaddr, Satype, CLI validity

Call Control

The following table shows the +CLIP parameters.

		Table 3-8: +CLIP Parameters
<Parameter>		Description
<n>	Enables/disables the CLI presentation indication after the ring indication:
	0	Disable CLI presentation
	1	Enable CLI presentation
	The default is 0.
<m>	Shows the subscriber CLIP service status in the network:
	0	CLIP not provisioned
	1	CLIP provisioned
	2	Unknown (for example, no network and so on)
<"number">	Calling line number. The number format is specified by <type>.
<type>	Type of address octet in integer format:
	145	Default when the dialing string includes the international access code character
	"+".
	129	Default when making a local call.
	128	Type of number is unknown (usually the output when the number itself is
	unknown).
<subaddr>	NULL, field not used (String type subaddress of format specified by <satype>)
<satype>	Field not used. Value is always 128 (unknown) - type of sub address octet in integer
	format.
<"alpha">	Name of the calling party (if provided by the network or if the number is found in the
	G24-L phone books).
<CLI validity>	The Validity of the Calling Line Identity presentation:
	0	CLI valid.
	1	CLI has been withheld by the originator.
	2	CLI is not available due to networking problems or limitations of the
	originating network.

Example

AT+CLIP=?

+CLIP: (0,1)//CLI presentation is disabled by the G24-L (0) and is enabled by the network (1)

OK AT+CLIP=1

OK

Example +CLIP indication: (…incoming call…)

RING

+CLIP: "2173845400",129,,128,"Doe John",0 Example +CLIP indication with restricted CLI: AT+CRC=1

OK

(…incoming call…, caller restricted the CLI presentation (used AT+CLIR)…)

+CRING: VOICE

+CLIP: "",128,,128,"",1

3-20 G24-L AT Commands Reference Manual April 15, 2008