PIONEERPOS G24-LC manual Manual Scope, Target Audience, Manual Organization

Preface

Note: All references to G24-L also apply to G24-LC, except where otherwise noted.

Manual Scope

This manual introduces the G24-L AT commands, and describes how software developers can use these commands to communicate with the G24-L device, and to create software applications that communicate with the G24-L using these commands.

Note: The integrator should read the corresponding SW release notes for the G24-L version he is using to get information about differences from this manual.

Target Audience

This manual is intended for software developers who communicate with the G24-L device using the AT commands, and create applications to communicate with the G24-L device using the AT commands.

Manual Organization

This manual contains the following chapters:

•“Preface” provides a scope for this manual, document convention, safety instructions and a liability notification.

•“Chapter 1: Product Features” introduces the new product features and provides a list of the AT commands.

•“Chapter 2: Introduction to AT Commands” provides an introduction to the AT commands, and includes a general explanation of the command’s format and usage. It also describes supported character sets and error handling.

•“Chapter 3: AT Commands Reference” provides a reference to all available AT commands, including examples, where relevant.

•“Chapter 4: Using the Commands” provides scenarios and examples for implementing various G24-L functionality, including G24-L setup and connectivity, SMS, call control, data calls, GPRS, Sleep mode, audio, STK and TCP/IP.

•“Chapter 5: Tools” describes the the G24-L drivers and application flashing tool.

•“Appendix A: Reference Tables” provides conversions between different character sets. It also provides an alphabetical list of all the AT commands.

April 15, 2008 G24-L AT Commands Reference Manual xvii